Barrow GPU Water Block For Nvidia RTX 4090 Founders Edition, Full Cover With Backplate PC Water Cooling Cooler, BS-NVG4090-PA

Compatibility:

(Including but not limited to the following models)

Nvidia RTX 4090 Founders Edition

After narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.

Compatibility based on this(these) PCB designs only.
Inlet/outlet port size: G1/4" thread

 Parts Included:

1x Full coverage GPU water block
1x Backplate
2x Plug fitting
1x Screw set
1x Barrow thermal pads (set)

Warnings:
1. Addressable RGB/A-RGB is 5V 3pin lighting system, and is ONLY compatible with 5V components.
RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.
Mix and match will NOT work and will cause damage.

2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.

3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.

4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.