Barrow GPU Water Block Backplane Block For MSI RTX 3090 3080Ti 3080 VENTUS 3X OC, Active Backplate Cooler, BS-MSV3090-PA2 B

Compatibility:

(Including but not limited to the following models)

MSI RTX 3090 VENTUS 3X 24G

MSI RTX 3090 VENTUS 3X 24G OC

MSI RTX 3080Ti VENTUS 3X12G OC

MSI RTX 3080TI VENTUS 3X 12G

MSI RTX 3080 VENTUS 3X 10G

MSI RTX 3080 VENTUS 3X 10G OC

Compatibility based on this(these) PCB designs only.

Inlet/outlet port size: G1/4" thread

Parts Included:

1x Full coverage GPU water block (according to the options of the selection)

1x Backplane (according to the options of the selection)

2x Plug fitting

1x Screw set

1x Barrow thermal pads (set)

Warnings:

1. Addressable RGB/A-RGB is 5V 3pin lighting system, and is ONLY compatible with 5V components.

RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.

Mix and match will NOT work and will cause damage.

2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.

3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.

The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.

4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.