Barrow GPU Water Block Cooling Backplane For GIGABYTE 3090 3080Ti 3080 GAMING EAGLE VISION, Waterway Backplate BS-GIG3090-PA2 B

Compatibility:

(Including but not limited to the following models)

Gigabyte RTX 3090 GAMING OC 24G

Gigabyte RTX 3090 EAGLE OC 24G

Gigabyte RTX 3090 EAGLE 24G 

Gigabyte RTX 3090 VISION OC 24G

Gigabyte RTX 3080 Ti  VISION OC 12G 

Gigabyte RTX 3080 Ti GAMING OC 12G

Gigabyte RTX 3080 GAMING OC 10G (rev1.0)

Gigabyte RTX 3080 GAMING OC 10G (rev2.0)

Gigabyte RTX 3080 EAGLE OC 10G (rev. 1.0)

Gigabyte RTX 3080 EAGLE OC 10G (rev. 2.0)

Gigabyte RTX 3080 EAGLE 10G (rev. 1.0)

Gigabyte RTX 3080 EAGLE 10G(rev. 2.0)

Gigabyte RTX 3080 VISION  0C 10G (rev. 1.0)

Gigabyte RTX 3080 VISION 0C 10G (rev. 2.0) 

After narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.

Compatibility based on this(these) PCB designs only.

Inlet/outlet port size: G1/4" thread

Parts Included:

1x Full coverage GPU water block (according to the options of the selection)

1x Backplane  (according to the options of the selection)

2x Plug fitting

1x Screw set

1x Barrow thermal pads (set)

Warnings:

1. Addressable RGB/A-RGB is 5V 3pin lighting system, and is ONLY compatible with 5V components.

RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.

Mix and match will NOT work and will cause damage.

2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.

3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.

The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.

4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.